Computer-controlled cable DJVVP3 details: 


 Computer-controlled cable DJVV DJVVP2 DJVVP3 DJYVP DJYVP2 
 DJYPVP300/500V polyethylene insulated twisted weave of split-screen, shielded PVC sheath computer cable 
 First, the production standards: 
 Q / ZWD 006-2001 "Computer control cable" 
 Second, the use of: 
 Our product is suitable for rated voltage 450/750V or DC 1000V and below the distribution equipment, as electric instruments, computer cable. 
 Third, the use of features: 
 Cable core temperature is not higher than 70 ℃, in the course of the cable should be to prevent heat radiation or direct contact with the national emblem. 
 Cross-linked computer cables, XLPE insulated cores allow long-term operating temperature of +90 ℃. 
 Cable laying temperature should not be less than 0 ℃. 
 Recommended bending radius: 
 Non-armored cable should be not less than six times the cable diameter; 
 There are armor or shield of the cable structure should be not less than 12 times the cable diameter; 
 Shielded cable should be a soft structure is not less than six times the cable diameter; 
 Specifications: 
 Nominal cross-section model core of a few lines 
 DJVR, DJVVPR, DJVVP2R, DJVVP3R, DJVPVPR, DJVP2VP2R, DJVP3R ... ... 0.5,0.75,1.0,1.50 1-61 on 
 DJVV DJVVP2 DJVVP3 DJYVP DJYVP2 DJYVP3 DJVVP DJVPVP DJVP2VP2 DJVP3VP3 ... ... 0.50,0.75,1.0,1.50 1-61 on 
 DJVVP22 DHVVP2-22 ... ... 0.50,0.75,1.0,1.50 5-61 on 
 Note: The cross-linking can refer to the same type of computer cable computer cable specifications, according to customer design requirements, which can produce flame-retardant, fire-resistant, low smoke and low halogen flame retardant, low toxicity and low smoke zero halogen flame retardant wire and cable. 
 Technical requirements: 1, conductive core three categories: first, the second is suitable for fixed installation (the first one is the solid conductor, the second is the stranded conductor) The third is a stranded conductor, suitable for move requires flexible cable. 
 2, the conductor structure and the DC resistance should meet the requirements. 
 Nominal conductor cross-section structure of 20 ℃ conductor resistance V / km less than 
 Type Number / single nominal diameter mm not tinned tinned 
 36.0 36.7 0.50 1 1/0.80 
 36.0 36.7 0.50 2 7/0.30 
 3 16/0.20 39.0 0.50 40.1 
 24.5 24.8 0.75 1 1/0.97 
 24.5 24.8 0.75 2 7/0.37 
 3 24/0.20 26.0 0.75 26.7 
 18.1 18.2 1.00 1 1/1.13 
 18.1 18.2 1.00 2 7/0.43 
 19.5 20.0 1.00 3 32/0.20 
 12.1 12.2 1.50 1 1/1.38 
 12.1 12.2 1.50 2 7/0.52 
 3 30/0.25 13.3 1.50 13.7